MOTUL MOTOCOOL FACTORY LINE is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives (OAT – Organic Acid Technology) to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design.

Ready to use coolant (do not dilute) developed for all types of motorcycles: road, off road, quads… Nitrite free, amine free, phosphate free, borate free, silicate free. Do not mix with non-organic products.

Specifications

Type: High Performance Coolant
Protection: OAT Technology -35℃/-31℉
Usage: Ready to use
Quantity: 1 Litre

Performance

Cooling system optimal protection from freezing and metallic parts from corrosion.
Specific anti-corrosion agents provides the best protection efficiency on aluminium/magnesium alloys –
according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE
divides by 3 the corrosion rate compared to a common organic coolant.

Provides an excellent thermal exchange and then engine cooling efficiency and prevents from boiling.
This organic OAT technology provides anti-corrosion properties that remain while high temperature and
ageing. Low corrosion inhibitors consumption allows extended drain intervals. Water pumps protection,
avoid cavitation. Seals, rubber pipes and plastic parts friendly.

Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweet taste but are harmful.

Recommendations

Ready to use, do not add any water
Drain intervals: Refer to the manufacturers’ recommendation.
Do not mix with non-organic products.
This product should not be used to protect drinking water systems against freezing

Properties

Color Visual Red
Density at 20°C / 68°F ASTM D4052 1.072
pH ASTM D1287 8.5
Freezing Protection ASTM D1177 -35°C / -31°F
Boiling Temperature 136°C / 277°F (+1.5 bar)
Alkalinity Reserve ASTM D1121 2.9 mg KOH/g